EVM and vvpat poll day full guidelines process officer duty. Step by step

         EVM and vvpat poll day full guidelines process officer duty. Step by step. How to start a poll? From the opening of the vote until closing. full process. October 21. The Election Commission of India has proposed a comprehensive process for voting in 2 state constituencies.

                    Here are some of the things that I am suggesting in regards to the action to be taken on polling day. Since it is written in a hurry, you should understand if there are errors in some words. Once again make sure.You can download a picture format of the action to be taken on voting day.

• What are the VVPAT machines?

                           When a voter presses a button in the EVM, a paper slip is printed through the VVPAT. The slip includes the poll character and name of the competitor. It authorizes the voter to validate his/her choice. After existing noticeable to the voter from a mirror case in the VVPAT for seven seconds, the ballot slip will be trim and dropped into the dropbox in the VVPAT device and a beep will be listened to. VVPAT machines can be accessed by polling officers only.

1) First connect the EVM machine to the closed state like B-V-C (B-Ballet Unit, V - V V PAT, C-Control Unit).

 2) BU + VV PAT should be kept in polling room with Control Unit PO-3.

 3) Put the black round button (VERTICAL) behind the VV PAT.

 4) Turn the CU ON.

 5) Make sure the status of the Seven Prints (Diagnostics Slip) initially printed in VV PAT is OK / Pass.

 6) Clear the CU.

 = (C-R-C) C = Close R = Result C = Clear

 7) Make sure the number of votes in the CU is arbitrary (0) by pressing the Total button on the CU.

 8) Show the representative of the candidates present in the polling room that there is no voting paper slip in the collection box of VV PAT.

 9) To start mock polling, at least 50 votes should be submitted to the PO by the candidate's representative.

 10) The candidate should take a candid note of the votes given.

 11) Press the CU's Close button and then press the Result button to record the votes the candidate has received.

 12) Remove the Ballet Slip from the VV PAT Collection section (be sure to have 50 votes + 7 Diegostics Slip = 57 in the mock poll.

 13) Candidate wise Ballet Slip should be calculated.

 14) The combination of Ballet Slip and Mock Poll.

 15) A number of Paper Slip Correct Number of CU Result Correct Representative Candidate wise votes recorded by BU voting by a representative of BU.

 16) After clearing all three paths of the result, clear the Mock Poll data by pressing the Clear button.

 17) Again, make sure the number of votes is arbitrary (0) by pressing the Total button on the CU.  VV PAT's Collection Box Paper Slip should be shown to the candidates present.

 18) Turn off the CU's Power button.

 19) Sub-section and section of CU to be sealed for voting (Green or Pink Paper Seal + special tag + with the signature of candidate/representative/ PRO on ABCD Strip Seal etc.)

 20) Seal the Adress tag of VV PAT Collection Box (with the signature of candidate/representative/ PRO)

 21) Be sure to hit the Seal as Mock Poll Slip on the back of all the paper slips that are set to depart at the time of Mock Poll.

 22) Put all (57) Paper Slip in a black envelope (Name and number of a polling station on the black envelope should sign the date of voting PRO and candidate representative).

 23) The black envelope should be kept in a plastic box.  The name of the polling station/number on the Plastic Box should be signed by the voting date of the PRO and the candidate's representative.

 24) Make Mock Poll Certificate (Annexure 21) precise.

 25) CU Power Switch on and ready for EVM voting.  (Up to 7 am in the time prescribed by the Election Commission)

 26) After the voting is complete (according to the time prescribed by the Election Commission) (after the last voter in the queue after 6 pm).

 27) A total number of votes should be recorded by pressing the Total Button on the CU.  (17 elsewhere on serial number 6 in 17C, in serial number 10 (4) elsewhere).

 28) Press the Close Button on the CU at 6 pm after all the voters have finished.

 29) Turn off the CU's power switch.

 30) Paper Roll Lock Button Horizontal on the back of the VV PAT.

 31) Remove the BU and VV PAT cable and remove the Battery.

 32) Put in CU / BU / VV PAT Carrying Case.  (Be careful that the letter CU / BU's Carrying Case appears above its letters.

 33) Seal all the above Carrying Case with the Address Tag.

            All my colleagues and staff who have been appointed for election work will be sure to use the Assembly election duty if you implement the above issues based on the above information.